Bộ thu phát AV không dây cho Camera Bada 2.4GHz 806 (10W)

Bộ thu phát AV không dây cho Camera Bada 2.4GHz 806 (10W)

  • Cập nhật lúc cuối: 16/06/2022 17:59:58,  Đã xem: 3598
  • Mã sản phẩm:
  • Bảo hành: 12 tháng
  • Trạng thái: Còn hàng
Giá bán:     (Chưa bao gồm VAT)
Bộ thu phát AV không dây cho Camera Bada 2.4GHz 806 (10W) 2.4G wireless transmission transmitter uses advanced microwave radio transmission technology, high-fidelity wireless transmission of video and audio signals , the video transmission distance range of up to 3000-5000 meters above the barrier wall in the lower level there are cases, up to 500 2000 m ( depending on the actual environment ) , the effective distance is more than five times the market similar machines.

KINH DOANH CÁ THỂ NGUYỄN MẠNH TRƯỜNG

Bán hàng Online nhận thanh toán Shipcod toàn quốc

Quý khách có nhu cầu mua hàng, liên hệ:

Mobile: 0915.26.36.36 / 093.669.5555 / 0327.91.91.98

Số 23 Ngõ Quang Trung , Phố Nghệ, Minh Cường, Thường Tín, TP.Hà Nội

Website: thietbibuudien.vn

Email: baogia.glink@gmail.com

Facebook: https://www.facebook.com/sieuthimaybodam/

Thời gian làm việc: từ 8h đến 18h (từ thứ 2 - thứ 7)

Bộ thu phát AV không dây cho Camera Bada 2.4GHz 806 (10W)

2.4G wireless transmission transmitter uses advanced microwave radio transmission technology, high-fidelity wireless transmission of video and audio signals , the video transmission distance range of up to 3000-5000 meters above the barrier wall in the lower level there are cases, up to 500 2000 m ( depending on the actual environment ) , the effective distance is more than five times the market similar machines.

This product has the following characteristics :

    High frequency, anti-jamming performance
    With a new circuit , a new structure designed to ensure clear reception of sound and image.
    Multiple channels to choose from , and each channel is not easy to produce interference between each other .
    With application extensions , adaptable
    Use fully enclosed housing , enhanced cooling effect and anti-jamming capability.

 Performance indicators:

 1 Work :2331-2391 MHz band
 2 Transmit Power :. 10 W
 3 Use Channel: 4
 4 can transmit audio and video
 5 Video signal system :. PAL / NTSC
 6 Audio input impedance : 1KΩ Video input impedance : 75Ω
 7 Power : DC 12V4A
 Installation :
 Open the box, the side marked "TX" for the transmitter , labeled "RX" for the receiver.
 Transmitter Installation :
 1 . Select the working channel
 End of 2 four-core 3.5 audio cable to the transmitter , Lotus head on one side connected to the signal source ( yellow video, white to left and right channels ) . The other four core 3.5 audio cable to the receiver , Lotus head to the display terminal ( yellow is the audio , and white to left and right channels ) .
 3 . Connect the antenna and the antenna erected
 4 . Power adapter into an electrical outlet and the DC output to the transmitter

 Receiver Installation:

 Installed with the transmitter , the channel should be consistent with the work of the transmitter , and the audio and video cable to the TV or monitor. After installing the transmitter and receiver , observe reception by adjusting the transmit antenna angle of the receiver until the image to achieve the best sound . The machine is set up four channels to choose from , the channel allocated for a switch to be valid.

Multi- channel receiver :
 Working channel transmitter fixed and varies with a scanning receiver to receive, you can simultaneously monitor many of the scenes . At this point as long as the receiver , the channel selector switch are pressed several working on it ( up to four monitors simultaneously ) .

 Note:
1 . When adjusting the angle of the antenna , not violently rotating to avoid damage ;
2 . You must use the factory supplied power adapter to avoid damage to the machine ;
3 . A transmitter can only work on one channel , the channel selection switch the transmitter can only press one ;
Installed list :
 1 . Receivers, transmitters each one
 2 . Power adapter 2
 3 . Audio and video cable 2
4 . Use a manual
 5. Antenna 2
Specifications:
Transmitter : 175 * 80 * 45 (MM) L * W * H
Receiver : 115 * 70 * 25 (MM) L * W * H

 

 Note : You can reprovision flat external antenna ( 500 yuan per set )

 I. The Company products shifting, one year repair kits.
 Two . Customers from the acquisition date of the Company's products since the company any quality problems replacement within a week .
 Three product replacement conditions: appearance intact, factory seal intact , complete accessories .
 Four . Genus of the following circumstances , the practice of repair, but the repair charges may apply .
 1 The Company does not use the power adapter supplied , causing high voltage burned .
 2 due to customer use, improper storage resulting in product moisture , flooding caused damage .
 3 . Seal torn or client privately Chaigai problems caused by the product quality .
 4 due to force majeure ( lightning, earthquakes, fires and other natural disasters ) caused destruction